First, the main features
1, packing: Toner
2, a solid content (WT%) 30-40
3, a density (g / cm3) 1.0-1.3
4, the viscosity (CPS) 13,000-30,000 (rotational viscometer, Ⅱ units, 75rpm, 25 ℃)
5, the coating area (cm2 / g) (depending on the film thickness) 100-200
6, square resistance (Ω / □ / 25цm) 20-1K
7, adhesion (3M600 tape, vertical pull) with no loss
8, hardness> H
9, flexibility (wire width 1mm, 2 公斤 × 180 ° outer flap × 1 分钟 × 10 times) △ R <20% R
10, electricity power change rate power stability <± 2% (about surface heating temperature 60 ℃, without external temperature control device, continuous current 30 days to test power)
Second, the use
1, the substrate PET;
2, 200-300 mesh stainless steel screen mesh or polyester screen printing;
3, diluents to our company special thinner XSJ-X diluted, should be fully mixed before use;
4, the curing process (recommended) 140 ℃ × 10 minutes;
5, cleaning agents cyclohexanone;
6, the storage room temperature storage, unopened storage period at six months or more;
7, packaging 1.00 kg (or according to requirements)
Third, the operation and safety
CCI-305D far infrared heating carbon paste containing organic solvents, should be used to maintain ventilation to avoid excessive internal steam inhalation: In case of contact with the skin, should be cleaned with water and soap.

CCI-305D far infrared heating carbon slurry Senndai Electronic Materials Co., Ltd. is a fast-drying temperature curing conductive carbon paste. It is cured by the ultra-fine carbon powder and a low temperature thermoplastic resins, thermosetting resins refinements made suitable for screen printing. It can be widely used in the printing of flexible far-infrared electric film, used on PET, PVC sheet, with good printability, compatibility, adhesion, powered heating power stability.